WirePro Expo 2024
StoneShield Engineering
Founded in 2017, headquartered in Castelo Branco Portugal, StoneShield is a leading developer of robotic solutions for the wire harness industry, specializing in the design and development of machines for industrial applications, with a focus on robotics, high voltage (HV), and taping applications.
Innovation and new developments are at the core of our values. Our developments are made in accordance with the strictest demands in terms of traceability, quality requirements, and industry standards.
Since our beginning, we have been nominated for Productronica's Innovation Award three times. In 2023, our commitment to innovation was recognized globally when we won 2nd Place at Productronica's Innovation Award 2023, the world's leading trade fair for electronics development and production in Munich.
With 100+ robots deployed and machines in 4 continents, we will continue to innovate and strive for excellence, making us the ideal partner for new developments and robotization in the industry.
RPM-V+
Robotic Punching Machine – With Vision
A robotic system designed to break plastic pins from connectors in a fast and automatic way. It has dedicated tools for each vias’ pattern and allows the processing of different connectors, in the same operation. The vision system checks each of the connectors to ensure that the punching process is accurate and burr free, identifying OK and NOK parts.
RoSI
Robotic Seal Inserter
RoSI is designed to insert blind seals and/or hard pins into connectors in a fast, fully automatic and controlled way. It can work with up to 4 seal feeders, combining soft seals and hard pins, which allows up to 4 different seals per connectors. The entire process is done automatically and at the end, a vision system will inspect the insertion process. It can also be supplied with an automatic connectors feeding system.
HV-TM
High-Voltage Taping Machine
The High-Voltage Taping Machine, is a spot taping machine designed to perform a precise spot tape that ties and protects the wire shield of HV cables. The position where the spot tape is made is highly precise, with a tolerance of +/- 0.5 mm. This position is ensured using sensors to detect the cable’s position. The machine is able to operate with different cross sections, by changing two side clamps.
HV-RoFAL
- Dereeler. If double core wires are used, 2 units required
- Kappa machine to cut the wires
- HV-RAM: to perform the pre-assembly, handling of wires to Lambda for processing and retrieving wires from Lambda after processing
- Lambda 240, for cable operations
- Cable rack to store final product
More information at: www.stshield.com