Crimper
CrimperDelta 220
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
CrimperDelta 240
The Delta 240 semi-automatic crimping machine with crimp force monitoring offers automatic crimp height adjustment and stripping unit – optionally with bad contact cutter.
CrimperDelta 260
The programmable Delta 260 can place a seal, strip the wire and crimp a terminal in one cycle. It offers crimp force monitoring, automatic crimp height adjustment and a bad contact cutter.
CrimperDelta 540
The Delta 540 is a semi-automatic benchtop crimping machine equipped with all the necessary functions to process IDC connectors – available with optional connector-specific kits.
CrimperBT-SC
The BT-SC is a highly flexible and accurate BenchTop stripping and crimping platform. This semi-automatic machine meets all requirements for premium wire processing.
CrimperSC-501
The Komax SC-501 is a multi-wire strip-and-crimp unit with an intuitive interface and high-speed processing capabilities. It's a reliable solution for optimizing wire preparation.
CrimperAM 02 C
The AM 02 C is an electropneumatically powered, modular stripping/crimping machine for processing small cross sections of 0.14 – 0.34 mm².
CrimperAM 02.1 C
The AM 02.1 C is an electropneumatically powered, modular stripper/crimper for uninsulated wires with a cross section of 0.14 to 0.75 mm².
CrimperAM 03
The electropneumatically powered AM 03 modular stripper/crimper processes loose twisted pin and socket terminals for strands with a cross section of 0.08 – 2.5 mm².
CrimperAM 03 C
The AM 03 C stripper/crimper processes small, loose twisted pin and socket terminals with cross sections of 0.08 – 0.5 mm². The strip and crimp depth is set manually.
CrimperAM 03 universal
The AM 03 universal crimping machine processes loose twisted pin and socket terminals in the range of 0.14 – 2.5 mm² for crimping with a 4/8-indent crimp shape,
CrimperAM 02 universal
The AM 02 universal stripper/crimper processes loose insulated Z+F ferrules with cross sections of 0.5 – 2.5 mm² using a quadro or trapezoidal crimping tool.
CrimperAM 02.1
The AM 02.1 modular stripper/crimper efficiently processes loose, uninsulated Z+F ferrules with cross sections of 0.25 – 4 mm² and crimp lengths of 5 – 12 mm.
CrimperAM 04
The AM 04 modular stripper/crimper efficiently processes loose, insulated Z+F ferrules with cross sections of 4 – 10 mm² and crimp lengths of 8 – 18 mm.
CrimperAM 04.1
The AM 04.1 modular stripper/crimper efficiently processes loose, uninsulated Z+F ferrules with cross sections of 4 – 10 mm² and crimp lengths of 8 – 18 mm.
CrimperAM 04 Duomatic
The AM 04 Duomatic stripper/crimper processes two loose insulated Z+F ferrules with cross sections of 4 – 10 mm² and crimp lengths of 8 – 18 mm simultaneously.
CrimperAM 05
The electropneumatically powered AM 05 stripping and crimping machine processes loose twisted pin and socket terminals. Sensors and actuators ensure that the terminals are positioned exactly.
CrimperUNIC-G
The UNIC-G is an electropneumatically powered stripping and crimping machine for ferrules from 0.5 to 2.5 mm² and with a crimp length of 8 and 10 mm.
CrimperUNIC-L
The UNIC-L electropneumatically powered stripping and crimping machine processes ferrules from 0.5 – 2.5 mm², a crimp length of 8 mm, and plastic collars in special sizes.
CrimperUNIC-LS
The UNIC-LS stripping and crimping machine processes ferrules of 0.5 – 2.5 mm² and a crimp length of 6, 8, and 10 mm as well as special sizes and multi-standard wires.
CrimperUNIC-LZ
The UNIC-LZ electropneumatically powered stripping and crimping machine processes loose twin ferrules from 0.5 to 1.5 mm² and a crimp length of 8 mm.
CrimperZ+F EVOCRIMP
The Z+F EVOCRIMP is an electrically powered stripping and crimping machine for processing Z+F ferrules from 0.5 to 2.5 mm² (AWG 20 – 14).
CrimperUNIC-GV
The UNIC-GV is an electropneumatically powered stripping and crimping machine that processes up to five ferrules on rollers without conversion or changeover.
CrimperCR 03 M
The CR 03 M electropneumatically powered and flexible crimper is designed for processing loose twisted terminals in the range of 0.08 to 2.5 mm².
CrimperCrimper-LS
The electropneumatically powered Crimper-LS bench crimper is designed for processing loose insulated ferrules of 0.5 – 2.5 mm² and crimp lengths of 6 – 12 mm.
CrimperWire Processing Center (WPC)
The WPC is an integrated solution for preparing individual wires with cross sections ranging from 0.5 mm² to 10 mm² based on orders from EPLAN or another CAE system.
CrimperPCM
The entirely pneumatically powered PCM fully automatic wire processing machine was designed for processing loose twisted terminals from 0.08 – 4 mm² with a 4/8-indent crimp shape.
CrimperSC 05 universal
The SC 05 universal is an electropneumatic and high-performance crimper for insulated or uninsulated twin or single ferrules from 0.5 mm² to 6 mm².
CrimperEHC13
The WDT EHC13 battery-powered hydraulic crimper with a crimping force of 130 kN is the mobile solution for repairs, installations, or prototype manufacturing.
CrimperUP15
The UP15 crimping machine crimps connectors easily, quickly, and safely. With its electrical connection, it is the perfect entry-level model into the world of wire processing.
CrimperUP14
The compact pneumatic UP14 crimping machine crimps individual terminals quickly and reliably. It is the ideal multi-purpose solution for producing small and medium-sized wire sets.
CrimperUP14BA
The UP14BA crimping machine crimps terminals easily and reliably in a shearing motion. Thanks to the terminal holding function, the plug is positioned in the profile without a positioning aid.
CrimperUP14ZLW
The compact UP14ZLW crimping machine processes individual terminals with linear movement. Together with the integrated forced sequence control, it offers maximum process quality.
CrimperSSC
The SSC pneumatic crimping machine with safety function makes it possible to work without finger protection. Thanks to the terminal holding function, plugs are ideally positioned in the profile.
CrimperUP35
The UP35 crimping machine meets the highest standards of quality with minimal space requirements. It can be quickly integrated into wire production for processing crimp terminals.
CrimperUP35BA
The UP35BA crimping machine processes crimp terminals to meet the highest standards of quality with minimal space requirements. In addition, the machine can be quickly integrated into wire production.
CrimperUP40
The UP40 crimping machine is the world’s first electropneumatic crimping machine. Thanks to the built-in compressed air monitoring system, this machine meets the highest standards of quality
CrimperUP60
With 60 kN, the UP60 is one of the most powerful pneumatic crimping machines. The adjustable return stroke ensures maximum efficiency and short cycle times.
CrimperUP65
The quiet, space-saving UP65 crimping machine processes wire cross sections of up to 300 mm². Common HV applications can be reliably implemented with a force of 150 kN.
CrimperUP150
The network-compatible UP150 crimping machine with crimp force monitoring and controllable authorization levels effortlessly processes large conductor cross sections with maximum process quality.
CrimperAKM405
The AKM 405 is a pneumatic machine for stripping cables up to max. 70 mm². The stripper is rugged, compact, and reduced to the essentials.
