M1650 Tube Marking Systems Komax #1
Marking Systems

M1650 Tube

The M1650 tube marking module prints marker tubes and pushes them onto the wire. The module is designed for machines in the new Zeta 6x0 range.

Talk to an Expert

Highlights

Watch full video M1650 Tube

M1650 Tube - Reliable color marking with thermal transfer marking unit

Reliable color marking with thermal transfer marking unit

Tube marking offers high abrasion resistance thanks to the thermal transfer marking process. High contrast for clear legibility is provided regardless of the conductor color.

M1650 Tube - Precise placement of tubes on the cable using a mandrel

Precise placement of tubes on the cable using a mandrel

The identification hose is inscribed, cut and then pushed onto a mandrel where the gripper takes over.

M1650 Tube - Precise placement of the tube over the wire thanks to a funnel

Precise placement of the tube over the wire thanks to a funnel

The tube is prepared by the grippers for pushing onto the wire. Finally, the tube is pushed over the wire via the gripper unit with a funnel.


Technical data

Measurement system for technical specifications
M1650 Tube specifications
Specification nameSpecification value
Tube length Omega 7xx (depending on tube material and insertion position of terminal) max.1.06 in
Tube length Omega 7xx (depending on tube material and insertion position of terminal) min.0.39 in
Wire cross section min.AWG20
Wire cross section max.AWG10
Cycle time1.9 sec./tube
Tube length Zeta 6x0 (depending on tube material) min.0.39 in

Downloads