Crimper
Delta 220
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
Accessories
Bar code scanner
The wireless barcode scanner is perfect for efficient wire processing as a robust, industrial-grade hand-held scanner for fast detection of 1D and 2D codes.Learn moreQuality Tools
Q2205
As a module in a wire processing machine, the Q2205 measurement device measures with a defined pull-out speed of 25 or 50mm/min the pull-out forces of 20 to 500 N.Learn moreQuality Tools
Q1210
The Q1210 precision measuring module for wire processing machines measures pull-out forces of 20 to 1000 N with a pull-out speed of up to 200mm / min.Learn moreQuality Tools
Komax 341
The Komax 341 crimp height measurement device measures terminals up to a height of 8 mm and compares them with the target crimp height. If there is no match, production will not start.Learn moreSoftware and Networking
QCenter
The QCenter software integrates the crimp height and pull-out force measurement devices into the production process and only releases production if the target and actual values match.Learn moreQuality Tools
Crimp Module Analyzer
The Crimp Module Analyzer quality measuring device is used to measure and check the stability of the crimp module in μm using a two-stage force simulator.Learn moreQuality Tools
CFAlab
The CFA-Lab PC software evaluates the CFA/CFA+ crimp force monitoring data from crimping machines and modules. Optimizing the settings minimizes rejects.Learn more
| Specification name | Specification value |
|---|---|
| Strip length min. | 0.004 in |
| Strip length max. | 0.51 in |
| Dismantling length min. | 1.3 in |
| Dismantling length with "short dismantling length" option min. | 0.9 in |
| Wire cross section, crimping min. | AWG32 |
| Wire cross section, crimping max. | AWG9 |
